PVC Paint
OHLASOL® — a specialised paint and surface treatment for PVC materials.
Our new coloring solution, with reduced VOC emissions and designed for spray or brush application on PVC objects and fabrics, is formulated to penetrate deeply into the material, ensuring a strong and lasting bond.
- For repainting plastic floors.
- For repainting vinyl wallpaper.
- For painting on PVC products.
- For airbrushing and spray painting.
- For topcoating. Matt or glossy surface.
Picture A: Conventional paint
Picture B: OHLASOL®
Developed with consideration for health and the environment. Contains no hazardous chemicals or solvents.
- Meets the emission requirements for indoor coating applications (ISO 16000–9:2024). Non-flammable.
- Provides good penetration into the substrate, remains flexible, and does not crack.
- Single-component paint (no primer or hardener required).
- Dries only upon contact with PVC material. As a result, tools do not dry out quickly and can be stored in a plastic bag.
- Can be complemented with a water-based clear coat, gloss or matte, to improve resistance to dirt and wear. The coating can be supplied with decorative granules.
INSTRUCTION: Cleaning and painting for PVC flooring:
- Remove old polish and lacquer by abrasing with a 3M-type scrubber pad.
- Apply a full coating with a roller at approximately 150–200 g/m². For light colours applied over dark substrates, use two thin coats instead of a single thick coat.
- Dry overnight. Alternatively, if the coating feels dry after at least about 4 hours (at room temperature), protective paper may be laid out for walking
- Apply the PU clear coat with a roller at approximately 100 g/m².
- Allow to dry for at least 24 hours. On high exposure areas, cover with protective paper for a few days to ensure full curing.
Contact Us
Address
- Motorgatan 6,
442 40, Kungälv - (+46) 0303-172 22
- ohla@ohlaplast.se